◈ B: Zurich Recognized Solutions]
Zurich Recognized Solutions는 취리히 공인시험연구소(Zurich Recognized Testing Laboratory)가 승인한 공인시험소로 간주됩니다. 또한 이 샌드위치판넬은 제조 업체의 지침뿐만 아니라 승인, 인증 또는 목록에 따라 설치 및 유지 관리됩니다.
1. 허용되는 실험실 시험계획
복합 샌드위치판넬을 평가할 수 있는 세계적으로 인정받는 “허용 가능한 실험실 프로토콜(Acc-eptable laboratory test protocol)”은 없습니다. 복합 샌드위치판넬을 평가하기 위해 다양한 지역 또는 국가 테스트 프로토콜을 사용할 수 있습니다.
중규모 화재 시험 계획을 기반으로 하는 복합 샌드위치판넬은 선택하지 않는 것이 좋습니다. 중규모 화재 시험에서 제기된 우려 사항에 대한 자세한 내용은 다음에 설명합니다.
실물 크기의 시험계획을 기반으로 하는 샌드위치판넬을 선택하는 것을 고려하는 것이 좋습니다.시험 중인 복합 샌드위치판넬에 대해 혹독한 화재 위험에 노출이 있는 시험을 선택하십시오. 이 시험에 서 샌드위치판넬은 금속 표면재, 판넬 조인트 및 단열재의 완전성에 도달해야합니다.
실물 크기의 화재시험에는 아래에 요약된 시험 계획과 같은 외관 시험과 룸 코너 시험이 포함될 수 있습니다.
1) 실물 크기 표면 화재시험
(1) 평가를 위한 미국 국가 표준 ANSI FM 4880
① 단열된 벽 또는 벽 & 지붕/천정 조립체(Insulated wall or wall & roof/ceilimg assemblies)
② 플라스틱 내부 마감재료(Plastic interior finish materials)
③ 플라스틱 외부 건물 패널(Plastic exterior building panels)
④ 벽/천장 코팅 시스템(Wall/Ceiling Coating systems)
⑤ 내부 또는 외부 마감시스템(Interior or Exterior Finish System)
(2) 외부 피복 시스템의 화재성능 BS 8414-1
① 제1부: 건물의 석재면에 적용된 비 하중 지지 외부 피복시스템의 시험방법(Part1: Test method for non-loadbearing external cladding systems applied to the masonry face of the building)
(3) 외부 피복 시스템의 화재성능 BS 8414-2
① 제2부: 구조용 강재 프레임에 고정되어 지지되는 비 하중 지지 외부 피복시스템의 시험방법(Part2: Test method for non-loadbearing external cladding systems fixed to and supported by a structural steel frame)
(4) CAN/ULC S134 외벽 조립의 표준 화재 시험방법
(5) DIN 4102-20 건축재료 및 구성 재료의 화재 행동
독일 건축 기술연구소의 승인 원칙의 일부로서 외벽 표면재의 화재 행동에 대한 구체적인 증거
(6) ISO 13785-2 외벽에서 화재시험에 대한 반응
제2부: 대규모 시험(Reaction to fire tests on facades-Part 2: Large scale test)
(7) NFPA 285
가연성 부품을 포함하는 외부 비 하중 지지 벽 조립의 화재전파 특성 평가를 위한 표준 화재 시험방법(NFPA 285 Standard Fire Test Method for Evaluation of Fire Propagation Characteristics of Exterior Non-Load-Bearing Wall Assemblies Containing Combustible Components)
(8) UBC 26-9 외장재의 인화성 평가 시험방법
중간 규모의 다층성 시험 장치를 사용한 가연성 부품을 포함 하는 무하중 지지 벽면 조립체(UBC 26-9 Method of Test for the Evaluation of Flammability Character-istics of Exterior, Nonload-bearing Wall Assemblies Containing Combustible Using the Intermediate-scale, Multistory Test Apparature)
(9) SP FIRE 105 외벽 조립 및 표면재 화재 반응
(SP FIRE 105 External Wall Assemblies and Facade Clad-dings Reaction to Fire)
2) 실물 크기 룸 코너 화재시험
(1) EN 14390 화재시험
표면 제품에 대한 대규모 룸 기준 시험(EN 14390 Fire test. Large-scale room refe-rence test for surface products)
(2) ISO 9705 화재시험에 대한 반응
표면 제품의 실물 크기 시험(ISO 9705 Reaction to fire tests. Full sc-ale room tests for surface products)
(3) ISO 13784-1
샌드위치판넬 건축 시스템의 화재시험에 대한 반응– 제1부: 소규모 시험(ISO 13784-1 Reaction to fire test for sandwich panel building system- Part 1: Small room test)
(4) ISO 13784-2
샌드위치판넬 건축 시스템의 화재시험에 대한 반응– 제2부: 대형 룸의 시험방법
(ISO13784-2 Reaction to fire test for sandwich panel building system- Part 2: Test method for large rooms)
(5) NFPA 286
벽 및 천장 내부 마감재의 화재 성장 평가에 대한 화재시험 표준 방법(NFPA 286 Standard Methods of Fire Tests for Evaluation Contribution of Wall and Ceiling Interior Finish to Room Growth)
(6) LPS 1181 Part 1
LPCB 승인 및 건설 제품 시스템 목록을 위한 화재성장 시험시리즈 제1부: 건축 외장 밀폐로 사용하기 위한 샌드위치패널 시스템과 조립식 외장을 위한 시험과 요구사항(LPS 1181 Part 1 Series of Fire Growth Tests for LPCB Approval and Listing of Construction Product Systems Part One: Requirements and Tests for Built-up Cladding and Sandwich Panel System for Use as the External Envelope of Buildings)
(7) LPS 1181 Part 2
LPCB 승인 및 건설 제품 시스템 목록을 위한 화재성장 시험시리즈 제2부: 건물의 내부 구조물로 사용하기 위한 샌드위치패널 및 조립 시스템에 대한 시험과 요구사항(LPS 1181 Part 2 Series of Fire Growth Tests for LPCB Approval and Listing of Construction Product Systems Part Two: Requirements and Tests for sandwich panel and built-up systems for use as internal const-ruction in buildings)
(8) UL 1040
단열 벽 구조의 화재시험(UL 1040 Fire Test of Insulated Wall Construction)
(9) UL 1715
내부 마감재료의 화재시험(UL 1715 Fire Test of Interior Finish Material)